Here is what I have with the RC-50 remote: If using the "CC/CV" charge profile: 02 LowBattCutOut LBCO = 11.5VDC 04 Battery Type BatType = CC/CV Max Amps = 200 Chg Volts = 14.5V EndChg = Time DoneTime = 2.0 Hr MaxTime = 8.0 Hr ReCharge = 13.0V 06 VAC Dropout Dropout = 80 VAC 11 Bulk Always Bulk Always = OFF If desiring to use a "Custom" charge profile to effectively duplicate a CC/CV profile: 02 LowBattCutOut LBCO = 11.5VDC 03 Absorb Time Absorb Hrs = 2.0 04 Battery Type BatType = Custom Absorb = 14.5V Float = 13.6V Equalize = 14.5V 05 Charge Rate Max Charge = 100% 06 VAC Dropout Dropout = 80 VAC 09 Final Charge Final = Silent Rebulk = 13.0V 11 Bulk Always Bulk Always = OFF Optionally, you can change "09 Final Charge" to "Final = Float" if you'd like. This will hold the battery voltage at 13.6v (as was set in the custom battery type menu) indefinitely. From the ME-RC manual: "The Float stage is a maintenance charge mode that maintains a constant voltage—while delivering up to the maximum rated current of the charger in order to power any DC loads connected to the batteries. Most 3-stage chargers finish the charge mode in Float and remain in Float as long as an AC source is available on the input of the charger.