I have a 12v 100ah BT battery and a Victron BlueSmart 15A AC charger. It has settings for both 14.4v and Lion. Any recommendations on the proper Victron settings for my battery?
geometry dash lite is a rhythm-based platformer game that is highly addictive. Demonstrate your skills by guiding a square item through a variety of obstacles and challenges. The objective is to finish every level without encountering any difficulties.
If you're seeking companionship in Delhi tonight, consider exploring our Escorts in Delhi category. It's a fun way to add some excitement to your evening, with a selection that includes blonde escorts, busty escorts, bisexual escorts, and even luxury escorts.
When hiring a private Escorts Service in Aerocity make sure to check out the quality of their service. Many of them provide massage services, including hot massage. In addition to this, you can even book your escort in advance – no matter if it’s on the streets or at your home!
I'm glad I came on your article since it provides me with a lot of helpful information. I'll be back on the blog often to help you. Best of luck with baldi's basics
@6ix9ine bf, you should use the 14.4V setting on your Victron BlueSmart 15A AC charger. The "Lion" setting is likely intended for lithium-ion batteries, which have different charging characteristics compared to lead-acid batteries.
Here are the settings that I have used for my SOK 12v100ah battery with the Victron IP67 charger...
Victron’s Li-Ion profile is NOT sufficient for non-Victron LiFePO4 batteries. Enter configuration and turn on “ADVANCED” switch, then select “Custom” charge preset. Then click “Advanced Battery Settings”.
The battery preset should be set to “User Defined”. Turn on “Expert Mode” switch.
Voltage Compensation:Temperature Compensation: Disabled
Bulk:Bulk Time Limit: 24 HoursRe-bulk Current: Enabled, set to full output current of charger, typically 25A
Absorption:Absorption Duration: FixedAbsorption Time: 1 HrRepeated Absorption: Every 7 days
Recondition:Recondition Stop Mode: Fixed timeRecondition Duration: 15M (This is the minimum allowed setting. It is already disabled in charge voltage settings, but set to this as a safety precaution)
geometry dash lite is a rhythm-based platformer game that is highly addictive. Demonstrate your skills by guiding a square item through a variety of obstacles and challenges. The objective is to finish every level without encountering any difficulties.
If you're seeking companionship in Delhi tonight, consider exploring our Escorts in Delhi category. It's a fun way to add some excitement to your evening, with a selection that includes blonde escorts, busty escorts, bisexual escorts, and even luxury escorts.
When hiring a private Escorts Service in Aerocity make sure to check out the quality of their service. Many of them provide massage services, including hot massage. In addition to this, you can even book your escort in advance – no matter if it’s on the streets or at your home!
Maybe slice masters can help you answer your questions.
I'm glad I came on your article since it provides me with a lot of helpful information. I'll be back on the blog often to help you. Best of luck with baldi's basics
@6ix9ine bf, you should use the 14.4V setting on your Victron BlueSmart 15A AC charger. The "Lion" setting is likely intended for lithium-ion batteries, which have different charging characteristics compared to lead-acid batteries.
Thanks for the thoughtful response. I appreciate It.
Here are the settings that I have used for my SOK 12v100ah battery with the Victron IP67 charger...
Victron’s Li-Ion profile is NOT sufficient for non-Victron LiFePO4 batteries. Enter configuration and turn on “ADVANCED” switch, then select “Custom” charge preset. Then click “Advanced Battery Settings”.
The battery preset should be set to “User Defined”. Turn on “Expert Mode” switch.
Charge Voltage Settings: Absorption Voltage: 14.6v Float Voltage: 13.8v Storage Voltage: 13.6v Recondition Voltage: Disabled BatterySafe: Disabled
Voltage Compensation: Temperature Compensation: Disabled
Bulk: Bulk Time Limit: 24 Hours Re-bulk Current: Enabled, set to full output current of charger, typically 25A
Absorption: Absorption Duration: Fixed Absorption Time: 1 Hr Repeated Absorption: Every 7 days
Recondition: Recondition Stop Mode: Fixed time Recondition Duration: 15M (This is the minimum allowed setting. It is already disabled in charge voltage settings, but set to this as a safety precaution)
yes, using the 14.4V charge the battery would be fine.