Thanks 😊 - although I these look like settings for lead acid - for example, the equalise duration should be zero as not relevant for LFP chemistry

Hi - please note that I got an error from the EPEVER software that the Boost Charging voltage must not be greater than the Equalisation charging voltage (14.6 > 14.4). I've set the equalisation charging voltage to 14.6v since the equalisation time is zero, so this should be irrelevant. Also please note that the Low voltage disconnect and reconnect figures appear to be reversed and this also caused an error, I've also changed the Low voltage disconnect to 10.5 since another error came up stating that Low voltage disconnect cannot be greater than Discharging Limit voltage. Also, another error stated that Under voltage warning must be smaller than Under voltage warning reconnect voltage, so I've changed the warning voltage to 11.4v Final entries are therefore: Low voltage disconnect = 10.5v Low voltage reconnect = 11.0v Discharging Limit voltage = 10.5v Under voltage warning = 11.4v Under voltage warning reconnect = 11.5v Please correct me if this any of this is wrong. Thanks Rufus

Fantastic. Many thanks.